GR185 motor grader - CE approved
Detailed Product Description
Technical Parameter GR180 motor grader | | Engine rated power/rev | 140kW/2200rpm | | Dimension | 8900×2625×3470mm | | Weight | 15400kg | | Distribution weight of front wheel | 4620kg | | Distribution weight of rear wheel | 10780kg | | Min. clearance | 430mm | | Front and rear axle clearance | 6219 mm | | Front and rear axle clearance | 1639mm | | Max. steering angle of front wheel | ±50° | | Max. inclination angle of front wheel | ±17° | | Max. swing angle | ±15° | | Frame steering angle | ±27° | | Min. turning radius | 7.3m | | Traction | ≥79kN | | Gradeability | 20% | | Forward speed | 5811192338 km/h | | Reverse speed | 51123 km/h | | Blade | | Max. lifting height | 460mm | | Max. Digging Depth | 500mm | | Max.inclination angle | 90° | | Cutting angle | 28°70° | | Rotating angle | 360° | | Blade length × arc height | 3965×610mm | | Driving wheel no. | Main technical parameter of optional working devices GR180 | | Front bulldozing plate | | Bulldozing width | 2744mm | | Digging depth | 110mm | | Rear scarifier | | Gear no. | 5 | | Digging depth | 350mm | | Scarifying width | 2095mm | | Gear no. | | | Digging depth | 2 | | Scarifying width | | | Medium harrow | | Gear no. | 11 | | Digging depth | 280 mm | | Scarifying width | 1325 mm | Main technical parameter of assembly | GR180 | | Engine | | Factory model | D6114ZG | | Type | Turbocharger 6-cylinder 4-stroke direct injection water cooled diesel engine | | Engine rated power/ rev | 140kW/2200rpm | | Bore X stroke | 114x135mm/4.5x5.3 | | Displacement | 8.3L | | Compressing ratio | 17.3 : 1 | | Battery | 2x12V/135A·h | | Motor | 24V 5.8kW | | Generator | 28V 70A | | Transmission | | Factory model | HC-6WG180/ZF-6WG200 | | Type | 6-Forward and 3-Reverse electro-hydraulic control power transmission | | Control type | Single lever electro-hydraulic cotrol | | Control pressure | 1.6-1.8MPa | | Forward speed | 5811192338 km/h | | Reverse speed | 51123 km/h | | Drive axle | | Factory model | Meritor XPRC1333H018 | | Main reduction ratio | 5.991 | | Axle speed ratio | 17.779 | | Brake | | Type | Dry | | Brake system | 4-rear-wheel full hydraulic brake system | | Brake type | Shoe | | Brake cylinder pressure | 10Mpa | | Brake system pressure | 16Mpa | | Brake | Manual shoe | | Tyre | | Type | Inner tyre | | Model | 17.5-25 RP12 | | Working hydraulic system | | Working pump | Gear pump | | Flow | 2x52L/min | | System pressure | 18Mpa | | Control type | Manual | | Hydraulic cylinder | Bore x stroke | | Blade raising | 90 x 1110mm | | Blade swing | 90 x 540mm | | Blade outlet | 90 x 1400mm | | Steering hydraulic system | | Type | Load sensing fully hydraulic steering system | | Steering pump | Gear pump | | Flow | 18 x 2.2L/min | | System pressure | 16Mpa | | Hydraulic cylinder | | | Bore×stroke | 70 x 350mm | | Max. steering angle of front wheel | ±50° | | Service refill capacities | | Fuel tank | 280L | | Engine | 24L | | Coolant | 50L | | Transmission | 26L | | Balance box | 46L | | Drive axle | 28L | | Hydraulic oil | 110L | | Worm wheel box | 2.5L |
|
| Product Model: | |
| Your Name: | |
| Phone: | |
| Email: | |
| Company Name: | |
| Address: | |
| Note: | |
| | |
| Product Model: | |
| Your Name: | |
| Company Name: | |
| Address: | |
| Phone: | |
| Email: | |
| Note: | |
| |
GR185 motor grader - CE approved
Send your message to this supplier